Kodak M22 Computer/connectivity problems, Direct printing Pictbridge enabled printer problems

Troubleshooting

Status	Solution
Memory card not	■ Card may be corrupted. Format the card in the camera (see
recognized or camera	page 38).
freezes with card	■ Use another memory card. Only SD or SDHC Cards are supported.
You cannot take a	■ Turn the camera off, then on again.
picture	■ Depress the Shutter button all the way (see page 7).
	■ Insert a new/charged battery (see page 1). Charge the Li-Ion
	battery whenever necessary.
	■ Memory is full. Transfer pictures to the computer (see page 39),
	delete pictures (see page 24), or insert another card.

Computer/connectivity problems

StatusSolution

Slide Show does not run on an external display device

■Adjust the camera Video Out setting to NTSC or PAL (see page 37).

■Make sure the external device settings are correct. (See the device’s user guide.)

Computer does not communicate with the camera

■Turn off the camera, then turn it back on.

■Make sure the battery is installed correctly (see page 1) and charged (see page 2).

■Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is connected to the camera and the computer (see page 39). Then turn on the camera.

■See KODAK Software Help at www.kodak.com/go/camerasw.

Direct printing (PICTBRIDGE enabled printer) problems

Status	Solution
Cannot print to a	■ In the Setup menu, change the Computer Connection setting to
PICTBRIDGE Printer	Other Application (see page 37).

43 www.kodak.com/go/support