Getting started

Copying pictures to your frame

Copy pictures to your frame’s internal memory from a memory card or USB device. Each time you insert a card or USB device, press OK and follow the copy directions.

CAUTION:

Do not remove a card or disconnect a device while copying. Your card, pictures, or device could be damaged.

1Insert a memory card or USB device (flash drive, card reader, hard drive).

The pictures start playing. A copy message appears for 15 seconds, “To copy pictures from <inserted source> to the frame’s internal memory, press OK.”

2While the copy message is displayed, press OK.

3Highlight your copy method:

This picture—copy the displayed picture.

All pictures in folder—copy all the pictures in a folder (folder represents the folder name, if there are any folders on the inserted card or device).

All pictures in source—copy all of the pictures on the card or USB device (source represents the type of card or device that’s inserted in the frame).

4Press OK.

The slide show plays while pictures are being copied.

NOTE: Copies are automatically resized to a lower resolution (smaller size). Full resolution is unnecessary for viewing and quickly fills up the frame’s memory.

Copying from internal memory to a memory card or USB device is not supported.

To copy pictures anytime a slide show is playing, with a card or USB device inserted, press OK,

highlight (Copy), and continue with step 3 above.

8

www.kodak.com/go/support

Page 14
Image 14
Kodak P87 manual Copying pictures to your frame, Press OK, Highlight Copy, and continue with above