Troubleshooting
www.kodak.com/go/support 49
Picture quality problemsPictures do not
transfer to computer
■See Help in EasyShare software.
Slide Show does not
run on an external
video device
■Adjust the camera Video Out setting to NTSC or PAL. (See the
“Customizing your camera” table starting on page 32.)
■Make sure the external device settings are correct. (See the
devi ce’s u ser’s guid e).
Status Solution
Picture is not clear ■To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■Clean the lens (page 60).
■Make sure the camera is not in Macro mode if you are more than
27.6 in. (70 cm) from your subject.
■Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
Picture is too dark ■Reposition the camera for more available light.
■Use Fill flash (page 9) or change your position so light is not behind
the subject.
■Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page 53.)
■To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
Status Solution