Kodak V705 manual Direct printing PictBridge enabled printer problems, Effective flash range

Troubleshooting

Status	Solution
Picture is too light	■ Reposition the camera to reduce the amount of available light.
	■ Turn the flash off (page 9).
	■ Move so that the distance between you and the subject is within the
	effective flash range.
	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ In Auto and SCN-Custom modes, adjust the Exposure Compensation
	(page 35).

Direct printing (PictBridge enabled printer) problems

Status	Solution
Cannot find the desired picture.	■ Turn on the camera. Make sure the camera is not in
	Favorites mode.
	■ Use the Direct print menu to change the image
	storage location.
The Direct print menu interface	■ Press any camera button to redisplay the menu.
turns off.
Cannot print pictures.	■ Make sure there is a connection between the camera
	and the printer (page 44).
	■ Make sure the printer and the camera have power.
Camera or printer display an error	■ Follow the prompts to resolve the issue.
message.

50 www.kodak.com/go/support