Doing more with your frame
www.kodak.com/go/support 40
Manually changing USB connection mode
The connection mode must match the device you connect the frame to: Computer or
Printer. The default is Connect to computer. You can change the connection mode
manually.
1Disconnect the printer or computer from the frame.
2On the frame, tap (Home ).
3Tap (S ett in gs ).
4Slide to highlight Device configuration, then tap Select .
5Highlight USB connection mode, then tap Select.
6Slide to highlight the mode you want to connect to, printer or computer, then tap
Save.
7Reconnect the device (printer or computer) that ma tches the connection mode in
step 6.