Kohler 8022A, 8023A manual Finish the Installation, Attach the Sprayhead, Attach the Sprayface

Models: 8022A 8023A

1 7
Download 7 pages 29.03 Kb
Page 5
Image 5
Finish the Installation

Finish the Installation

1.With the ribs of the sprayhead facing up, attach the sprayhead to the waterway.

2.Using a 3/16” hexagonal key, secure the sprayhead to the waterway with the 2 securing screws (supplied). Do not overtighten.

3.Check the sprayhead for upward and downward movement and that it sits squarely within the housing.

4.Place the nozzle membrane over the sprayhead

Note! For optimum performance make sure that the membrane is applied evenly.

5.Tilt the sprayhead downward so that the ribs on top of the sprayhead are exposed.

6.Insert the grooves of the sprayface over the ribs of the sprayhead.

7.Press the sprayface down to cover the sprayhead, as illustrated.

8.Tilt the sprayhead upwards to expose the setscrew holes on the bottom of the sprayhead.

Important! The setscrews must be flush with the edge of the sprayface frame. If the setscrews protrude outside of the sprayface frame product damage will occur.

9.Using a 7/64” hexagonal key, turn the setscrews anti-clockwise until they are flush with the edge of the sprayface frame.

Waterway

Sprayhead

Hex Screws

Ribs

Groove

Nozzle

Membrane

Attach the Sprayhead

Ribs

Finished Wall

Sprayface

Setscrews

Attach the Sprayface

5

1063864-AN2-E 17/02/12

Page 5
Image 5
Kohler 8022A, 8023A manual Finish the Installation, Attach the Sprayhead, Attach the Sprayface