Install the Watertile Showerhead Prepare the Housing:
1.Position the housing so that the back of the leak shield is facing you.
2.Apply a bead of silicone sealant in the groove around the outside of the housing. Do not apply silicone sealant in or near the weep hole.
3.Allow the silicone sealant to cure.
Install the Components:
1.Position the housing with the sealant side towards the finished wall and the narrow end of the housing facing down.
2.Position the so that the nipple is through the centre and press firmly against the
finished wall.
3.Thread the adaptor onto the nipple.
Install the Waterway:
1.Press the waterway into place over the adaptor.
2.Secure the waterway to the adaptor with the screw provided. The waterway will be secure once the housing is completely seated against the wall and does not turn or move.
Apply Silicone Sealant
Weep Hole
Finished Wall
Leak Shield
Housing
Adaptor
Waterway
Double Ribs | Slot |
|
4 |
