Kohler CFI230G manual Operation, Warm Up Function Optional, To Operate the Shower, Step

Ensure glass panel is vertical

STEP

9

Drill 4 x 3mm holes

through jamb into wall

channel

Fit 4 x B screws

B

STEP

10

Check glass is vertical. If not

remove screws, re-drill and

re-fit as required.

Re-fit rubber strip over

screws

STEP

11

OPERATION

Low, Medium or High Flow Button - Buttons glow BLUE when pressed

Temperature

Control Knob

Warm Up/Off Button

-glows BLUE when powered

Warm Up Function (Optional)

Carefully remove the Water Delivery System

from the Water Delivery Wall Jamb.

STEP

12

8 CFI230G

Slacken screws ‘A’. Push the glass panel into

the wall jamb. The glass should be 2mm lower

than the top of the wall jamb. Tighten screws ‘A’

when the glass is in the correct position

A

STEP

13

1.Press the Warm Up push-button.

2.The unit delays turning on to allow you to get out of the shower.

3.The Warm Up push-button flashes for a number of

seconds until water comes out of the handset at the desired temperature.

4.When the water is at the desired temperature the unit turns off waiting for you to shower.

To Operate the Shower

1.Press the Low, Medium or High flow push-button.

2.Water will come out of the handset at the desired temperature.

3.To alter the showering temperature, turn the temperature control knob. Whilst the showering temperature stabilises, the selected flow push-button will flash.

4.Press the Off push-button at the end of your shower.

Caution!

Anyone who may have difficulty understanding or operating the controls of any shower should be attended whilst showering. Particular consideration should be given to:

•the young

•the elderly

•the infirm

•the disabled

•anyone who suffers from a medical condition that can result in temporary incapacity (e.g. epilepsy or blackouts).

•anyone inexperienced in the correct operation of the controls.

CFI230G 21