IMPORTANT SAFETY INSTRUCTIONS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS

READ AND FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING: When using electrical products, basic precautions should always be followed, including the following:

WARNING: Risk of personal injury. Do not permit children to use this unit unless they are closely supervised at all times.

WARNING: Risk of personal injury. To avoid injury, exercise care when entering or exiting the bath.

WARNING: Risk of electric shock. Do not permit electric appliances (such as a hair dryer, lamp, telephone, radio, or television) within 5’ (1.5 m) of this bath with airjets.

WARNING: The use of alcohol, drugs, or medication can greatly increase the risk of fatal hyperthermia. Prolonged immersion in hot water may induce hyperthermia. Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the normal body temperature of 98.6°F (37°C). The symptoms of hyperthermia include an increase in the internal temperature of the body, dizziness, lethargy, drowsiness, and fainting. The effects of hyperthermia include: (a) failure to perceive heat, (b) failure to recognize the need to exit the bath, (c) unawareness of impending hazard, (d) fetal damage in pregnant women, (e) physical inability to exit the bath, and (f) unconsciousness resulting in the danger of drowning.

An equipment grounding terminal is provided in the field wiring compartment. To reduce the risk of electric shock, this terminal must be connected to the grounding means provided in the electric supply panel with a conductor equivalent in size to the circuit conductors supplying this bath with airjets.

A pressure wire connector is provided on the exterior of the blower motor or control within this unit to permit connection of a bonding conductor between this unit and all other exposed metal in the vicinity, as needed to comply with local requirements.

Use this bath with airjets only for its intended purpose as described in this manual. Do not use attachments not recommended by Kohler Company.

Never drop or insert any object into any opening.

The bath must be connected only to a supply circuit that is protected by a Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device (RCD). Such a GFCI or RCD should be provided by the installer and should be tested on a routine basis. To test the GFCI or RCD, press the test button. The GFCI or RCD should interrupt power. Press the reset button. Power should be restored. If the GFCI or RCD fails to operate in this manner, the GFCI or RCD is defective. If the GFCI or RCD interrupts power to the bath without the test button being pressed, a ground current is flowing, indicating the possibility of an electric shock. Do not use this bath. Disconnect the bath and have the problem corrected by a qualified service representative before using.

Do not allow the water temperature in the bath with airjets to exceed 104°F (40°C).

Hydro-massage action can cause even a small amount of bubble bath, bath soap, shampoo, or bath oil to foam excessively. For this reason, please do not use these products during blower operation.

Your new Kohler bath with airjets has been listed by Underwriter’s Laboratories, thus ensuring safety for you and your family. Your new bath also conforms to rigid ANSI and IAPMO standards set within the plumbing industry.

1159617-5-B

2

Kohler Co.

Page 2
Image 2
Kohler K-1969 manual Important Safety Instructions, B Kohler Co

K-1969 specifications

The Kohler K-1969 is a high-efficiency toilet that combines modern design with advanced technology, making it a popular choice for households seeking both functionality and aesthetic appeal. Known for its sleek lines and compact design, this one-piece toilet is not only stylish but also space-saving, making it an excellent fit for various bathroom layouts.

One of the standout features of the K-1969 is its powerful flushing system. It utilizes Kohler's revolutionary Aqua Piston technology, which allows for a more efficient flush by using a wider, 360-degree funnel that optimizes water flow. This system significantly reduces clogs and enhances overall performance, ensuring that every flush is effective, thereby minimizing water waste.

In terms of water conservation, the K-1969 is engineered to use just 1.28 gallons per flush (GPF), adhering to WaterSense guidelines, which promote water efficiency. This makes it an environmentally friendly option that can help lower water bills while making a positive impact on sustainability efforts.

Comfort is another essential characteristic of the Kohler K-1969. With an ergonomic height, it offers a comfortable seating position that is particularly beneficial for individuals with mobility challenges or those who simply desire a more convenient experience. The toilet's one-piece construction not only adds to its modern look but also simplifies cleaning by eliminating the gap between the tank and bowl, reducing areas where dirt and grime can accumulate.

The K-1969 is available in a variety of colors and finishes, allowing homeowners to coordinate with their bathroom décor. Installation is straightforward, thanks to its integrated design, and the toilet's durable materials ensure longevity and resistance to scratches and stains.

Furthermore, the Kohler K-1969 incorporates advanced flushing technology designed for quiet operation, maintaining a peaceful bathroom environment. The toilet's sophisticated engineering also minimizes secondary splashing, enhancing hygiene.

In summary, the Kohler K-1969 is a prime example of how modern engineering and design can come together to create a toilet that is not only aesthetically pleasing but also remarkably efficient and comfortable. With its powerful flushing performance, water-saving capabilities, and ease of maintenance, it stands out as a superior choice for any bathroom upgrade. This combination of technology and style makes it a smart investment for homeowners looking to enhance their bathroom experience.