Safety Features (cont.)
The pump and toilets are listed by Underwriter’s Laboratory (UL) for safety. The fill valve is approved by International Association of Plumbing and Mechanical Officials (IAPMO) for use in this system.
The pump motor and circuit board are sealed in a housing separate from the impeller (which propels the water). The motor turns the impeller by a magnetic coupling. This ensures a separation between the impeller and the motor with electronic controls. There are no gaskets or
Your new toilet is designed to be flushed once every 70 seconds. This feature assures adequate time for the tank to fill with water and provides consistent operation of the motor. However, a second flush can be made 35 seconds after the first flush. If you activate the second flush at this interval, you must wait 105 seconds to activate a third flush. If you attempt a third flush before the 105 seconds have elapsed, the toilet will not flush. This is normal operation.
An overflow slot between the tank and bowl allows water to drain into the bowl and out the trapway if the water level in the tank becomes too high.
Care and Cleaning
WARNING: Risk of property or product damage. Do not use
Kohler Co. shall not be responsible or liable for any tank fitting damage caused by the use of cleaners containing chlorine (calcium hypochlorite).
For best results, keep the following in mind when caring for your KOHLER product:
•Use a mild detergent such as liquid dishwashing soap and warm water for cleaning. Do not use abrasive cleaners that may scratch or dull the surface.
•Carefully read the cleaner product label to ensure the cleaner is safe for use on the material.
•Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
6 | Kohler Co. |
