Manuals / Kohler / Household Appliance / Plumbing Product

Kohler K-6227A Connect the inlet hose to the spout connection, Check for leaks, 1109784-A2-A

Models: K-6227A

1 12

Download 12 pages 31.04 Kb

Page 8

Spout Connection

Spout Connection

Inlet Hose

12.Connect the inlet hose to the spout connection.

13. Connect and tighten the supply hoses.

Note! If the sink installation requires that you coil the supply hoses, maintain a 76 mm diameter inside the coil.

Ø 76 mm Min

Cold

Hot

14. Check for leaks.

1109784-A2-A

8

Image 8

Kohler K-6227A manual Connect the inlet hose to the spout connection, Connect and tighten the supply hoses, Check for leaks

Contents

Installation and User Guide Karbon Kitchen Sink Tapspecification important informationPlumbing Connections Applicable StandardsInstallation 1109784-A2-A 3. Insert the tap through the mounting hole4. Partially thread the screws into the ring 5.Fit the fibre and metal washers onto the threaded shank 9.Partially thread the screws into the ring 10.Slide the washer onto the remote valve threaded shank. Install the ring leaving approximately 6 mm between the ring and the countertop 12.Connect the inlet hose to the spout connection 13. Connect and tighten the supply hoses14. Check for leaks Spout Connection Inlet HoseKey 1109784-A2-A 16. Flush the lines 17. Reinstall the aerator15. Remove the aerator Spare Parts dimensions All dimensions in mm 1109784-A2-ACare and cleaning Customer Care