Cleaning and care

Warning:

First remove the plug from the mains power socket before cleaning the charging station 3. There is a risk of receiving an electric shock!

NEVER open the housing of the charging station 3 or the toothbrush! They cannot be resealed in a water-tight manner.

Clean the charging station 3 only with a soft, lightly moistened cloth. Do not use detergents or solvents. They can damage the plastic surfaces.

After use, clean the brush heads 1 thoroughly under run- ning water. We recommend cleaning the brush heads 1 in a standard commercial cleaning fluid for prosthetics every 2 - 4 weeks. After about 3 months, at the latest however when the bristles bend outwards, you should fit a new brush head 1.

The brush holder 2 can be cleaned without problem with water and some liquid soap. For this, simply lift the brush holder 2 upwards.

Travelling case

Should you wish to take the toothbrush with you on a tour, you can pack both the hand element and two brush heads in the travelling case 0.

- 9 -

Page 11
Image 11
Kompernass KH123 operating instructions Cleaning and care, Travelling case