Dell 1708FP appendix Cleaning Your Monitor

7.78 lbs (3.53 kg)

Weight without stand assembly

(For wall mount or VESA mount considerations - no cables)

Weight of stand assembly 3.52 lbs (1.6 kg)

Environmental

Temperature:
Operating	5° to 35°C (41° to 95°F)
Nonoperating	Storage: -20° to 60°C (-4° to 140°F)
	Shipping: -20° to 60°C(-4° to 140°F)
Humidity:
Operating	10% to 80% (noncondensing)
Nonoperating	Storage: 5% to 90% (noncondensing)
	Shipping: 5% to 90%(noncondensing)
Altitude:
Operating	3,657.6m (12,000 ft) max
Nonoperating	12,192 m (40,000 ft) max
Thermal dissipation	256.08 BTU/hour (maximum)
	119.5 BTU/hour (typical)

Cleaning Your Monitor

CAUTION: Read and follow the safety instructions before cleaning the monitor.

CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.

To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.

Use a slightly-dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.

If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.

Handle your monitor with care as darker-colored plastics may scratch and show white scuff marks more than lighter-colored monitor.

To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.

Back to Contents Page