Important!
To adjust the halogen floodlight e, use the knurled screw t, the fixing screw f and the floodlight lever w.
The horizontal position is adjusted in that the knur- led screw t is loosened and, with the assistance of the floodlight lever w, it is placed in the desired position. Retighten the knurled screw t when the optimal position has been found.
The vertical position is adjusted in that the fixing screw f is loosened and and, with the assistance of the floodlight lever w, it is placed in the desired position. Retighten the fixing screw, f when the optimal position has been found.
Important!
During the adjustments always hold the floodlight lever w firmly.
Important!
Do not use extension cables that are longer than 15 m.
Removing the halogen lamps.
1.Switch the appliance off with the ON/OFF switch q, remove the plug from the socket and allow the Floor Halogen Floodlight to cool down.
2.Remove the middle screw on the top of the lamp housing. Loosen the glass cover g.
3.Use a dry cloth to take out the halogen lamp.
4.Remove the halogen lamp.
Inserting the halogen lamps
1.Ensure that the Floor Halogen Floodlight is
2.Take the new halogen lamp from its packaging with a dry cloth. Place a ceramic end on the appropriate retainer.
3.Place the other ceramic end on the opposite retainer. Ensure that contact has been made on both sides. The retainers should now hold the halogen lamp securely, such that the halogen lamp can no longer move itself.
4.Now close the glass cover g and replace and retighten the middle screw.
5.Switch the Floor Halogen Floodlight on with the ON/OFF switch q.
6.Should it not function, repeat steps 1- 5.
Cleaning
Danger of electrical shock
Always remove the plug from the socket before cle- aning the Stand Halogen Floodlight.
Under no circumstances may the appliance be immersed in water or held under running water during cleaning.
Clean the exterior of the Stand Halogen Floodlight with a moist cloth.
Attention!
Ensure the Floor Halogen Floodlight is inaccessible for children.
- 4 -
