Importer
KOMPERNASS GMBH BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com
Troubleshooting
If the material to be shredded jams:
This means that you have attempted to feed too much material into the appliance
(max. 7 sheets 80g/m2 paper, max. 1 credit card, max. 1 CD/DVD).
• Place the switch w in position should the item to be shredded become jammed. The appliance now goes into reverse and the material to be shredded is returned.
•Place the switch w in position 
(OFF), as soon as the jammed item is returned.
If the appliance suddenly ceases operation: This means that the appliance has overheated and the automatic safety
Important: Remove the power plug from the wall socket to avoid an unintended starting of the appliance
•To switch the appliance off, move the switch w
into the middle position 
(OFF).
•Allow the appliance to cool down.
•Reinsert the power plug into the socket.
•Switch the appliance on, in that the switch w
is placed in the position 
.
If the appliance doesn`t allow itself to be switched on:
•Check that the plug is correctly connected to a wall socket.
•Try out a different wall socket.
•The appliance is probably defective. Have the appliance checked by qualified specialists.
When the appliance is switched on, however, the shredding process will not start:
•The appliance has overheated and triggered the automatic safety
Important: Remove the power plug from the wall socket to avoid an unintended starting of the appliance.
•To switch the appliance off, move the switch w
into the middle position 
(OFF).
•Allow the appliance to cool down.
•Replace the power plug into the socket.
•Switch the appliance on, in that the switch w
is placed in the position 
.
The cutter attachment q is not correctly placed.
•Place the cutting attachment q in the correct position.
- 6 -
