IB_KH2201_02_AR909_UK_4.qxd 12.11.2007 13:10 Uhr Seite 9
Radio operation
1.To switch on, turn the volume controller VOLUME / BUZZ g, until an audible »Click« is heard.
2.Using the volume controller VOLUME / BUZZ g now set the desired volume.
3.Set the waveband selector switch ; to the desired wavelength range (FM/AM).
4.Adjust the tuning wheel f to select the desired radio station. The frequencies can be read off from the frequency scale y.
5.To switch off, turn the volume controller VOLUME / BUZZ g until an audible »Click« is heard (KH 2201.Turn the volume controller upwards, KH 2202: Turn the volume controller to the rear).
Setting up the telescope aerial
On Model KH 2201:
• Extend the telescope aerial w completely.
The telescope aerial w on Model KH 2201 is not rotatable.
If you try to turn the telescope aerial w, the aerial mounting will be damaged.
On Model KH 2202:
•Remove the telescope aerial w from its retainer and set it up.
•Extend the telescope aerial w completely.
To improve reception in the FM frequency range, slowly turn the end of the telescope aerial w in various directions. As soon as you have found a position with good reception from your desired radio station, leave the telescope aerial w in this position. For the reception of AM transmitters, an aerial is built into the appliance. For improved reception, alter the position of the appliance in radio mode.
- 9 -
