3M SE-400 user manual Meter settings, Setting up meter parameters

10

Setup/instrument configuration

Meter settings

Meter settings

The Meter Settings screen is used to select general instrument parameters including the log interval, exchange rate, language, contrast, and peak weighting. Table 3-1 outlines the meter/general settings on the SE-400 Series.

	Setting up meter parameters		keys to select Settings and press
1.	From the setup screen, press	/		key.
			Settings (selected)

	Figure 3-3: Choosing meter settings
2.	To select one of the meter settings, press		/	keys. Once selected, press	key.
	• This moves the selection to the changeable /value field.)
3.	To change the log rate, exchange rate, peak weighting, language, and/or contrast, press				/
	keys. Press	key to save the selection. Repeat as necessary or escape to abort.

Shading denotes the setting/parameter is

selected (e.g., Log interval)

Exchange Rate setting (3, 4, or 5 dB)

Figure 3-4: Choosing meter settings

Sound Examiner SE-400 Series