3M SE-400 user manual Run, stop, and view results, Main/multi- measurement screen in Run mode

21

Measure

Run, stop, and view results

Run, stop, and view results

The run/stop key is used to run and stop integrating measurements, which is saved as a session. The viewable measurement screens include the multi-measurement screen (which is the default screen) and the single measurement screen. When the SE-400 Series is in stop mode, it will display the summary data until the instrument is powered off or the run key is pressed.

1. To start a session, press the	key. The Run icon will appear with a run-time clock indicating the
current duration of your session.
	Run-time clock
	Run icon

Response Time/Frequency Weighting softkey menus Parameters can be changed in stop mode. They cannot be changed when in run mode.

Figure 4-8: Main/multi- measurement screen in Run mode

2.To stop a session, press the key. The Stop icon will appear.

Note: the duration of the session is indicated by the run-time clock.

3. To view a single large measurement, press the			key. To view different measurement parameters,
press the	/	arrow keys.

Single Measurement screen

Figure 4-9: Single measurement screen in stop mode

Sound Examiner SE-400 Series