Panasonic DP-6010, DP-3510 Manual Skyshot Mode, Memory button, Changing the default M1/M2 size

Other Features

Skyshot Mode

■Manual Skyshot Mode

When using this function, the custom size should be registered into memory (M1, M2) in advance.

CSet 07 Manual Skyshot Mode in Copier Settings first. (See page 53)

Platen

Upper-

Left

Corner

B4·FLS

1	2	3	4 5
Place the	Touch the JOB	Select Custom	Number of	Press
Original*	MEMORY button	Size (M1 or M2)	Copies	START

2A3

Changing the default M1/M2 size

This setting should be carried out by a Key Operator.

#Select the COPIER SETTINGS in Function Setting mode.

(See page 68)

$Touch the FG buttons to advance to the 04/04 Display Screen of Copier Settings menu.

%Touch the 19 Set key operator code button.

&Enter the Key Operator’s ID Code and then press the OK button.

(Touch the FG buttons to advance to the 03/05 Display Screen.

)Select 12 M1, size and 13 M2, size and enter the original’s size.

*Touch the OK button.

NOTE	∗ If using i-ADF, place original on the centre position of ADF Tray. The i-ADF tray can be
	fed only 50 -105 g/m2 plain paper.

CWhen changing the M1 or M2 Size, consult with the key operator.

CWhen using the manual skyshot mode, the M1 and M2 are turned On and other job memory cannot be used.

CTo reset the manual skyshot mode, press the RESET key.

58