Panasonic DP-3510, DP-6010 manual Sadf Mode, Sadf Single Sheet Automatic Document Feeder Function

2-Sided/Original \ Copy

SADF Mode

■SADF (Single Sheet Automatic Document Feeder) Function

This mode adds a 5 second delay to allow another original to be placed on the i-ADF. Special originals (like thin paper, etc.) can be fed from the i-ADF Tray and copied continuously using the SADF Mode. This is useful, when copying multiple sets of originals that exceed the maximum capacity of the i-ADF Tray of 70 sheets (80 g/m2). (See the Example below)

Before using this feature, the SADF Mode must be enabled in the copier function settings. (See page 67)

■Procedure

i-ADF

B4·FLS

Face-Up

Making Copies

1A7

Place the Original One at a Time or up to 70 sheets (80 g/m2)

Place the next original within 5 sec. of last ejected copy.

(2)	3	4 5 6
COPY SIZE	# Select	Number of	Press Copy
(Reduction/	2-SIDED/	Copies	START
Enlargement	ORIG. \
Only)	COPY

$ Select SADF

Function

(Continued on the next page)

NOTE	CSADF function cannot be combined with 2 \ 1 and 2 \ 2. (See page 59)
	COptional Image Memory or Hard Disk Drive may be required.

35