Panasonic DP-3510 Digital Skyshot Mode, Touch the 06 Digital skyshot mode button, Parallel

Other Features

Skyshot Mode

■Skyshot allows copying a manuscript without generating dark borders

even if the platen cover or ADF is opened.

Skyshot mode eliminates dark borders around the originals, and is especially convenient for copying small-sized originals like bank checks or documents with unusual shapes (round, oval, etc.). These documents can be reproduced without generating any unnecessary black areas simply by making a copy with the cover open.

Two types of Skyshot modes can be selected;

Digital Skyshot Mode : The scanning area (size) is not pre-determined.

Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in advance. (See page 72)

■Digital Skyshot Mode

Copies

B4·FLS

1

Place the Original on the platen (Opening the Platen Cover/ADF)

(2) 3

Press START

Select the Digital Skyshot Mode

Making

The Digital Skyshot has been 2 modes ( copy or copy ).

The default setting of Digital Skyshot Mode is “None”.

Before using this mode, select each setting by using the Function setting.

#Press the FUNCTION Key.

$Touch the COPIER SETTINGS button.

%Touch the [ button to advance to the 02/04 Display Screen of Copier Settings menu.

&Touch the 06 Digital skyshot mode button.

(Select the desired function and touch the OK button.
06 Digital skyshot setting
No	: None
Freeshp (Free shape) : Copy is made with slant.		copy
Parallel	: Copy is made to parallel. copy
	(within 5 degrees)

NOTE	CAn incorrect exposure may occur when there is a black line at the edge of
	the original or an image which the copier interprets as a black pattern in the
	skyshot mode.

CAn incorrect position detection of the original may occur when a strong light

shines onto the glass during skyshot mode.

57