Panasonic DP-3510, DP-6010 manual Touch Panel Display, Function Categories, Tab Name Features See

Operation Chart

Touch Panel Display

■Function Categories

	Tab Name	Features	See Page
		CInitial “Ready to copy” screen.
A	BASIC MENU	COriginal Mode, Exposure Control and Paper Tray	16-26
		selection.
		CJob selection (Tandem/Remote, Proof Set and etc.).
		CReserved Job(s) verification.
B	2-SIDED/ORIG. \	C2-Sided, 2 Page, Booklet Copy Mode, Multi-Size	27
	COPY	Feed and/or SADF function selection.
C	SORT/FINISH	CElectrical Sort Mode and/or optional Finisher	37, 84, 89, 94
		selection.
		CZoom Copy Mode or Creative Features (Book, Edge,
D	ZOOM/EFFECTS	Margin, Stamping, Centering, Image Repeat or	38
		Inverse Mode) selection.
E	INSERTION/	CInsertion, OHP Interleaving, Overlay or File Edit	46
	OVERLAY	Mode selection.
F	JOB MEMORY	CJob Memory Mode selection.	54

■Touch Panel Display Brightness Adjustment

To adjust the brightness of the Touch Panel display, press and while holding down the “C” (CLEAR) key, keep pressing the “ORIGINAL SIZE/A3” or the “COPY SIZE” keys until the desired brightness is achieved.

ORIGINAL SIZE/A3 : Dimmer

COPY SIZE : Brighter

NOTE	CDuring the copy operation and after making copies, the fan motor may start
	spinning. This is a normal operation and is used to cool
	down the copier.

CIf you are not going to use the copier for long periods

of time, turn the Main Power Switch on the Back and the Power Switch on the Left Side of the machine to the OFF position.

Getting To Know Your Machine

5