Sharp XR-32S-L Adjusting the Projector Function “PRJ - ADJ” Menu, Auto Sync Auto Sync, Adjustment

Adjusting the Projector Function (“PRJ - ADJ” Menu)

		Picture	SCR - ADJ		PRJ - ADJ		Help
1		Auto Sync				On
2		Auto Power Off				On
3		Auto Restart				On
4		STANDBY Mode				Standard
5		System Sound				On
6		Speaker				On
7		Audio Input				Audio 1
8		RS-232C				9600bps
9		Fan Mode				Normal
0		System Lock				Disable
		Lamp Timer(Life)		0	h	0 min	100%
		SEL./ADJ.		ENTER			END
1 Auto Sync (Auto Sync
		Adjustment)
Selectable					Description
	items
On			Auto Sync adjustment will occur when
			the projector is turned on or when the
			input signals are switched, when
			connected to a computer.
Off			Auto Sync adjustment is not automati-
			cally performed.

Note

•Auto Sync adjustment is also performed by pressing AUTO SYNC on the remote control.

•The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector.

•When the optimum image cannot be achieved with Auto Sync adjustment, use manual ad- justments. (See page 48.)

2 Auto Power Off Function

Selectable	Description
items
On	When no input signal is detected for
	more than 15 minutes, the projector will
	automatically enter standby mode.
Off	The Auto Power Off function will be
	disabled.

Note

•When the Auto Power Off function is set to “On”, 5 minutes before the projector enters standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.

Menu operation n Page 38

3 Auto Restart Function

Selectable	Description
items
On	If the power cord is unplugged from the
	outlet or the breaker switch is turned off
	when the projector is on, then the
	projector automatically turns on when
	the power cord is plugged into the AC
	outlet or the breaker switch is turned on.
Off	The projector does not turn on
	automatically when the power cord is
	plugged into the AC outlet or the
	breaker switch is turned on.

4 STANDBY Mode

When set to “Eco”, power consumption is re- duced in standby mode.

Selectable	Description
items
Eco	The monitor output and RS-232C
	functions are switched off in standby
	mode.
Standard	The monitor output and RS-232C
	functions are activated even if the
	projector is in standby mode.

5 Setting the Confirmation

Sound (System Sound)
Selectable	Description
items
On	A confirmation sound is made when
	the projector turns on/off.
Off	No confirmation sound is made.
6 Speaker Setting
Selectable	Description
items
On	The audio signal is output from the
	internal speaker.
Off	The audio signal is not output from the
	internal speaker.

Features Useful

45