Sharp XR-32X-L, XR-32S-L Operating with the Remote Control Continued, Connecting with a USB cable

Operating with the Remote Control (Continued)

Using the Remote Control as the Wireless Computer Mouse

When connecting the projector and the computer with a USB cable, you can use the remote control as the computer mouse.

If the computer is placed too far away from the projector to be connected via the USB cable, the remote receiver (optional, AN-MR2) makes it possible to operate the projector with the remote control. For details, see the operation manual of the receiver.

Connecting with a USB cable

	Computer
To USB terminal		Remote receiver
	To USB terminal	(optional, AN-MR2)

or

USB cable

(commercially available or available as Sharp service part QCNWGA014WJPZ)

The mouse pointer can be oper- ated in the following way after it is connected.

■When moving the cursor

Press MOUSE/Adjustment buttons (P/R/O/Q).

■When left-clicking

Press L-CLICK.

■When right-clicking

Press R-CLICK.

■When your computer supports only a

one-click mouse (such as Macintosh)

Press L-CLICK or R-CLICK.

L-CLICKand R-CLICKhave common function.

PAGE UP/

PAGE DOWN buttons

MOUSE/Adjustment buttons ('/"/\/)

R-CLICK button

L-CLICK button

■ When using [Page Up] or [Page Down]

Same as the [Page Up] and [Page Down] keys on a computer keyboard.

Press PAGE UP or PAGE DOWN.

Note

•This function only works with the Microsoft® Windows® OS and Mac OS®. However, this function does not work with the following operation systems that do not support USB.

•Versions earlier than Windows® 95

•Versions earlier than Windows® NT4.0

•Versions earlier than Mac OS® 8.5

•You cannot use this function when displaying the menu screen.

•Confirm that the computer recognizes the USB connection.

34