Sharp XR-32X-L Operating with the Remote Control, Displaying the Pointer, Using the Spot Function

Operating with the Remote Control

BREAK TIMER button

FREEZE button Displaying the Pointer

MAGNIFY buttons

POINTER button

SPOT button

Adjustment buttons

(P/R/O/Q)

EFFECT button PICTURE MODE button

ECO+QUIET button

AUTO SYNC button

1 Press POINTER and press P/R/ O/Qon the remote control to move the pointer.

•Press EFFECT to change the pointer icon (5 types).

Star Finger1 Finger2 Heart Underline

2 Press POINTER again.

• The pointer will disappear.

Displaying and Setting the Break Timer

1 Press BREAK TIMER.

•The timer starts to count down from 5 minutes.

On-screen display

Using the Spot Function

1 Press SPOT and press P/R/O/Q on the remote control to move the spot area.

• Press EFFECT to change the spot area size (3 types).

1/9 1/25 1/8

Press P/R/O/Q to adjust the

2 length of the break time.

•Increases with P or Q

5 minutes s 6 minutes s 60 minutes

•Shortens with O or R

4 minutes s 3 minutes s1 minute

•The break time can be set in units of one minute (up to 60 minutes).

Canceling the break timer display function

Press BREAK TIMER.

Note

•Break Timer does not function while the pro- jector is operating the “Auto Sync”, “FREEZE” or “AV MUTE” functions.

2 Press SPOT again.

• The spot area will disappear.

Switching the Eco+Quiet Mode

Press ECO+QUIET to switch the Eco+Quiet mode between on and off.

•When the Eco+Quiet Mode is set to “ON”, the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend.

Note

•Refer to “Lamp Setting” on page 42 for de- tails of the Eco+Quiet mode.

32