Installation, For Your Safety | Panasonic DP-3510, DP-6010 instruction

Precautions

Installation

■The copier should not be installed in areas with the following conditions:

CExtremely high or low temperature and humidity.

Ambient conditions Temperature: 10 – 30°C

Relative humidity: 30 – 80 %

CWhere temperature and humidity can change rapidly, causing condensation.

CDirect exposure to sunlight.

CDirectly in the air conditioning flow.

CIn areas of high dust concentration.

CIn areas of poor ventilation.

CIn areas with chemical fume concentration.

CIn areas with extreme vibration.

CWith unstable or uneven conditions (floors, etc.).

FOR YOUR SAFETY

■The maximum power consumption is 1.45 kW.

A properly wired (grounded), dedicated, 6.5A, 220-240V AC outlet is required. Do not use an extension cord.

Caution Note: Disconnect from the mains supply before removing covers.

CAUTION

CTHIS PRODUCT CONTAINS A LITHIUM BATTERY. DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL SOLID WASTE OFFICIALS.

Before Starting

11

Image 11

Panasonic DP-3510, DP-6010 manual Installation, For Your Safety

Contents

English Making Copies Before StartingOptions Model and Serial Number Important Information DP-3510/4510/6010 Operating Instructions Useful Office Functions Common Features and Usage Operation Chart Function Categories Touch Panel Display Brightness AdjustmentTab Name Features See Touch Panel Display Energy Star Table of Contents Others Problem SolvingOptions Laser Safety PrecautionsFor Your Safety Ventilation HandlingToner and Paper For Your Safety Installation For U.K Control Panel Touch Panel Display Touch Panel Display Indications Contents See Full Size Copying Basic Menu Inappropriate Originals Using the Sheet Bypass Reduction or Enlargement Copying Copying with Preset Ratios Proof Copying Proof Copying Tandem/Remote Copying Tandem user parameter Tandem/Remote Copy Settings RegisteringSelect 04 Key operator mode Add new tandem desti Tandem/Remote Copy Settings RegistrationKey operator mode button Edit tandem desti Tandem/Remote Copy Settings Editing Deletion Tandem/Remote Copy Settings DeletingSelect the registered machine name Touch the YES button to confirm $Touch Print JOB Queue Job Queue Completion Notice Completion Notice Sided/Orig. \ Copy Button Sided/Original \ Copy Face-Up \ 2, 2 \ 1, 2 \ 2 Copy\ 2 Copy \ 1 Copy ADF Platen Book \ 2 CopyBook \ 2 Copy Copy Copy 1 Copy 1 CopySided Copy 1 Copy Mode Originals Layout Booklet Copy Booklet Copy Reduction Multi-Size FeedingOriginals Copies Sadf Single Sheet Automatic Document Feeder Function Sadf Mode 100 Operation When using Sort Mode without optional Finisher 1. FeaturesSort/Finish Sort/Finish Button Zoom/Effects Button Zoom/Effects To set the width and length Zoom to same ratio Effect ModeZoom Copying Zoom Auto Zoom Auto Zoom Copying Edge Book Margin Select Edge, Book or Edge/Book/Margin Select Stamping FeatureEffect Mode Numbering Stamping Page Numbering Stamping Date Stamp Effect Mode Date Stamp Effect Mode Number Stamping Stamping Issue Number StampingSelect Stamping Issue Inverse Centering/Image Repeat/Inverse CopyCentering Image Repeat Insertion/Overlay Button Insertion/Overlay Cover Cover Select Insertion Select Blank/Copy InsertionInsertion ADF Original Copied Paper OHP Interleaving OHP Interleaving Presentation Presentation mode# Select Presentation mode Presentation Lighter and Darker buttons OverlayOverlay 1st-page $Touch the File Name Edit File EditFile Edit Select Insertion Select File Edit File Select Form Overlay modeForm Overlay Form Overlay To recall a job stored in memory Job MemoryTo store a job in memory Touch Reserve a Job button Other FeaturesConcurrent Copying Touch Reserve a Energy Saver/Interrupt Energy Saver ModeSleep/Auto Off Mode Interrupt Mode Digital skyshot setting Skyshot ModeDigital Skyshot Mode Touch the 06 Digital skyshot mode button Touch the 19 Set key operator code button Manual Skyshot ModeChanging the default M1/M2 size Memory button First Combined Function TableOthers Next Selections Options Using Function Modes to change the Initial Copy ModesFunction Key Reset Key Function Screen Modes Function Initial Setting Using Function Modes to Change the Initial Machine Modes Copier Settings Function Using Function Modes to change the Initial Scanner Modes Scanner Settings Using Function Modes to change the Initial Printer Modes Printer Settings CCR, CR + LF General Functions for Key Operator Input the Key Operator ID Code to change SettingsModes Function Initial Setting General Functions for Key Operator Function Screen Modes Function Initial Copier Settings for Key Operator Modes Function Function Printer Setting for Key Operator Proceed as Follows Function Setting for Key OperatorChanging the Auto Contrast Setting Press the Function Key Select 00 Paper size Changing the Paper Size# Touch General Functions $Select 04 Set key operator code button For Tray 2Insert the paper size indicator Department Counter Dept. Counter mode $ Touch 04 Set key operator code Maximum Number of Copies Exit function modeChange the Department Counter Number, ID Code and limit Weekly Timer Network Settings Components Accessories Punch Unit Bin Finisher DA-FS600/2 Bin Saddle-Stitch Finisher DA-FS605Bin Capacity sheets Saddle Stitcher Tray Capacity Finisher FeaturesHow to use Face-Up Platen New Staple CoverClose the Stapler Cover Staple Cartridge Bin Saddle-Stitch Finisher DA-FS605 Cover Green Handle Stitcher Unit Until it Stops Close the Punch Unit Front Cover Remove the Staple Cartridge Components Bin Finisher DA-FS330 Ex. $-1 ADF Face-Up Platen New Empty Replacing the staple cartridgeStapler Cover Stapler Unit Lock Lever Staple Cartridge Punch disposal Pull out the finisher Reinstall the staple cartridgeProcedures steps 7 to 10 Check operation. See Bin Finisher Bin Saddle-Stitch Finisher DA-FS355 Multiple copies are sorted automatically Stacked with shift Stapler Unit Staple Cartridge New Staple Case Punch disposal Pull out the finisher Pull out the trash box Procedures steps 7 to 9 and check Memo File key Network Scanner OptionDocument Scanning Document Scanning Adding a New PC’s IP Address Touch Scanner Settings buttonAddress Book Favourite section, press YES Do not change the default Port NumberWithout your Network Administrator’s If you want to assign this address into Editing the Address Book Touch the Scanner Settings button100 101 Touch 07 Delete address Touch the Scanner Settings button102 Touch the Function Key Adding the DD Server IP Address 103 Ex Salesdept Up to 65535, default is104 Then enter the directory name Sheet Paper Tray Problem Solving105 Adding Paper k Close the door 106Adding Paper Sheet Large Capacity Paper Tray LCT DA-MA301 Replacing the Toner Bottle ? 107 Paper Exit/Fuser Area See Paper Feed Unit ADU Area See 108Removing a Misfed Paper Bin Finisher DA-FS600/FS605 When the Punch Unit isInstalled 109 Bin Saddle-Stitch Finisher DA-FS605 only 110 Knob B Upper Cover Misfed Paper When paper cannot be removed111 Bin Finisher DA-FS330 Upper Cover 112Bin Saddle-Stitch Finisher DA-FS355 Return the finisher to original position Lower Knob Stitch Tray 113Close the Finisher Front Finisher Front Cover Right Cover Misfed Paper Transport Release Lever 114Paper Transport Area Paper Entry Area Close the Left Cover 115Paper Exit/Fuser Area Reverse Area Automatic Duplex Unit ADU 116 Capacity paper tray to the right 117Right Cover Lower #Hold the latch and slide the large ADF Tray Green 118ADF Close the ADF Check TroubleshootingBefore Calling Service 119 120 User Error Codes U CodeAs a rule, clean weekly 121 Replacing the BatteryBattery Replacement Message Battery Replacement Procedure DP-6010/4510/3510 Copier Specifications122 System Console 2 DA-DS602 123ADF Standard System Console 1 DA-DS601 Punch Unit DA-SP31 124Bin Finisher DA-FS600 Bin Saddle-Stitch Finisher DA-FS605 Punch Unit DA-SP41 125 Part Name Remarks Options and Supplies126 Supplies 127 128 Index 84, 91 129 For Service, Call