89
Accessories
Options
B4·FLS
3. How to use
i-ADF
Face-Up
Platen
4
Number
of Copies
5
Staple Position
(ex. $-1)
Face-Down
1
Place the
Original
23
Select
SORT/
FINISH
mode
Select
Finisher
Mode
Select the type of copy group mode into 2-bin finisher
and press OK.
#SORT
Multiple copies are sorted automatically and
stacked with shift.
$ROTATE-SORT (Upper bin only)
Copied sets are separated by rotation and exited
onto tray.
%ROTATE-GROUP (Upper bin only)
Grouped copies are rotated and exited onto tray.
&NON-SORT
Copy is stored on the tray.
(PUNCH*
Sorted copies are punched and exited onto tray.
(Except Rotate-Sort and Rotate-Group modes)
)SHIFT-SORT (Lower bin only)
Copied sets are offset and exited onto tray.
*STAPLE-SORT (Lower bin only)
Sorted copies are stapled and exited onto tray.
+SHIFT-GROUP (Lower bin only)
Grouped copies are offset and exited onto tray.
∗In the 4 hole punch mode, A3 size
and A4 B size are available.
NOTE
CThe above sort modes may not work if you are using gray originals, as this
may cause a memory overflow.
CIn such a case, it is recommended either make copies by separate lots
(except staple-sort) or install optional Hard Disk Drive (DA-HD60).
CIf output sheets are curled, or not properly aligned, remove the paper from
the paper tray, turn it over, and replace it in the paper tray.
Press
START
P089_dp4510(pb).P65 7/31/02, 10:50 AM89