Panasonic DP-6010, DP-3510 Job Memory, To store a job in memory, To recall a job stored in memory

Job Memory

■Five Copy Jobs can be stored in Memory (M1 to M5) for recall at a later time.

B4·FLS

To store a job in memory

#Set up the copy job to be stored in memory, by first selecting each function you wish the copier to perform.

$Touch the JOB MEMORY button.

%Touch the Memory in button. ()

&Touch the M1, M2, M3, M4 or M5 button.

To recall a job stored in memory

(Touch the JOB MEMORY button.

)Touch the M1, M2, M3, M4 or M5 button.

*Press START.

When touching the M1, M2, M3, M4, or M5 button, recalled job stored in memory will be display at the job setting area.

NOTE

CJOB MEMORY mode will not be deleted even if the power switches are turned Off.

CWhen storing a new job into a programmed memory location, the previously stored job will be overwritten and erased.

CM1, M2 can use as manual skyshot mode by setting user function mode.

54