Panasonic DP-3510, DP-6010 manual Using the Sheet Bypass, Inappropriate Originals

Basic Menu

■Notice for i-ADF

Inappropriate Originals

CPaper with a smooth surface such as glossy and coated papers

CTransparencies

COriginals with a Lead Edge that is “creased”, “folded”, “punched” or “glued”

CPaste-ups

CPressure sensitive or carbon backed papers

CPaper with excessive curl

CStapled originals

CFreshly printed copies from a laser printer

When copying the thick Booklet, open the ADF and check the ADF Hinge is returned to original angle if ADF rear side is lifted up.

Copies

1

2

Making

■Using the Sheet Bypass

Copying on Special Paper, etc.

Sheet Bypass

Open the Sheet Bypass.

Pull out the Sheet Bypass Tray

until it stops.

#Place the sheets of paper into the tray. (Approximately up to 50 A4 size sheets/80 g/m2)

Do not load paper above the upper limit arrow indicated on Side Guides.

Insert the paper until it stops.

$ Adjust the side guides.

Incorrect adjustment may cause the paper to wrinkle, misfeed or skew.

ATTENTION	CDo not feed curled paper through the sheet bypass to avoid misfeed.
	CCertain types of transparency film may not be compatible and may damage
	your machine. Consult with an authorised Panasonic dealer for advice
	regarding non-standard paper types. (Panasonic has tested “3M PP2500”
	transparency film and found it to be compatible.)

17