Troubleshooting

Before Calling Service

Check

Unit Does Not Operate

Does the display light?

Does the Energy Saver key flash (or light) and displays are turned OFF?

(See page 56)

Does any of the U## codes and messages appear on the display?

(U1, U4, U6, U7, U9....etc.,)

Does the Add Staples indicator and message appear on the display?

Does the Add Paper indicator and message appear on the display? (J )

Does the paper misfeed indicator and message appear on the display? (I)

Does E#-## indicator and message appear on the display?

The machine would not accept the next job during operation, instructed job would not be accepted for long time period or job would not be completed.

Light Copies

Does the exposure indicator say “LIGHTER”?

Does the Add Toner indicator and message appear on the display? (?)

Action

Check if the Power Switches (Main Power Switch on the back and Power Switch on the Left Side of the machine) are turned ON and if the power cord is plugged into the AC outlet.

Press Energy Saver key on the control panel.

Perform actions in accordance with each message.

Add Staples (DA-FS600/FS605: See page 85)

(DA-FS330

: See page 90)

(DA-FS355

: See page 94)

Remove all jammed staples. (DA-FS600/FS605: See page 87)

(DA-FS330

: See page 91)

(DA-FS355

: See page 95)

Add paper. (See page 105)

Remove the misfed paper. (See page 108)

Turn the Main Power Switch on the Back and the Power Switch on the Left Side of the machine to the OFF position, then back ON again. If the error code does not clear, call your Service provider.

Turn the Power Switch Off/On.

Touch the “DARKER” button.

Replace the Toner Bottle. (See page 107)

119

Others

Page 119
Image 119
Panasonic DP-3510, DP-6010 manual Troubleshooting, 119, Before Calling Service, Check, Action