3M SE-400 user manual Printing and reports, Summary Data Report, Calibration Report

27

SoundPatrol feature (non-IS models only)

Printing and reports

Printing and reports

The SoundPatrol features (non-IS models only) an easy to access print icon , located on the measurements and calibration screens, which is used for report printing when connected to the handheld printer (sold as an option). The following three reports are explained below.

SoundPatrol Reports and Samples						Description
1-Second Continuous Data Report:						The 1-second continuous data report provides a printout of 1- second
	TResponse = SLOW					measurements of the sound pressure level values and the average
	Time, SPL, Leq, Weight = C					(Leq) values at the appropriate time response (fast/slow) and frequency
	2,	68.0,	67.4			weighting (A, C, or Z).
	3,	69.0,	68.0,
	4,	70.1,	68.4,			•	To print the 1-second continuous data report, power on the SE-400
	5,	71.3,	69.2				Series and press the		key while the printer is connected. Once
	6,	71.2,	69.8,				in run mode, press the		softkey from the measurement screen
	7,	68.1,	69.8,				and the connected hand-held printer will print the report. At any
	3M SE-400 R.10D
							time, press	icon to end the printing. The handheld printer will
	S/N: SEK06BETA06
							stop the 1-second report.
Summary Data Report:						The summary data report displays the time response and the summary
						data parameters including the maximum sound pressure level (SPL),
		TResponse = SLOW
						the average SPL (Leq), the minimum SPL, the runtime, date, time,
		SPLmax = 78.8 dBA
		Leq = 71.5 dBA				location, and a by field (for an optional signature). These parameters
		LAE = 84.9 dBA				may be changed via the print setup menu. (See Print setup section
		SPLmin = 64.4 dBA				above.)
		Runtime = 00:00:17
		Date: 15-Mar-2012			 Note: this report will print after the 1-second continuous data report
		Time: 9:21:54					has finished printing (or is stopped).
		Location:__________________
		By: ______________________				•	To print the summary data report, press				key on the SE-400
							while the printer is connected. Press the				softkey. Press
							on the SE-400 and the summary data report will appear after the 1-
							second continuous report.
Calibration Report:						The calibration report displays the time response setting, the calibration
						date and time, the previous SPL (noted as old), the reference level
		3M SE-400 R.10D				value, and the new calibrated level.
		S/N: SEK06BETA06
		TResponse = SLOW				•	To print the calibration report, press the				softkey from the
		CALIBRATION DATE:
		14:21:05		15-MAR-12			calibration screen while connected to the printer. To access from a
		CALIBRATION INFO:					measurement screen, press the			icon and then press the
		Old SPL =		113.8 dBA			CAL softkey.
		Ref Level =		114.0 dBA
		New SPL = 114.0 dBA

Sound Examiner SE-400 Series