3M SE-400 user manual Time and date setting,  Setting the Time and Date parameters

12

Setup/instrument configuration

Time and date setting

Time and date setting

The Time-Date is used to set-up the current time and date parameters. These settings are used in many of the charts and graphs in the software and when viewing calibration history and/or time-history measurements on the instrument.

 Setting the Time and Date parameters
1. From the setup screen, select Time-Dateby pressing the	/	keys and press	key.

2.To change the Time or Date fields, press the / key to select and press key.

3.Press / arrows to change the values. To move to the next field press / arrows.

4.Press key to save or escape to abort.

•Repeat steps 2 through 4 to change Time and/or Date.

5. To exit the screen, press		key. (This will return to the previous screen. To return to the start screen,
press	key a second time.)

Time and Date fields

Day field

It will automatically display based on the date field.

Figure 3-6: Time and Date Setup screen

Sound Examiner SE-400 Series