3M user manual 3MTM Sound Examiner SE-400 non-IS Models Sound Level Meter

ii

Dangers, Warnings, Cautions & Battery non-IS models

3MTM Sound Examiner SE-400 non-IS Models Sound Level Meter

Dangers, Warnings, Cautions & Battery

Danger!

Failure to observe the following procedures may result in serious personal injury

•Not for use in explosive or hazardous locations. This product is not intrinsically safe.

•Contains built-in lithium polymer battery. Do not incinerate or dispose of in fire. Do not disassemble, alter, or re-construct.

Warning!

Failure to observe the following procedures could damage the instrument

•Read the manual before operation.

•Do not store in temperatures outside -20°C to 60°C (-13°F 140°F).

•Do not immerse in liquids.

•Condensation may damage your instrument.

•Substitution of components may impair the accuracy of the instrument. Repair should be performed by authorized service personnel only.

Caution!

General

•The battery in this instrument has limited shelf-life, even if never used.

•A non-condensing environment is required for proper measurements.

•Do not charge battery outside the range of 0°C to 40°C (32°F to 104°F).

•Battery run-time may be reduced when operating at lower than 0°C (32°F) temperatures.

Intended Use:

The SE-400 Series non-IS models are intended to measure sound pressure levels in air. Consult your company’s safety professional for local standards, or call 3M at 1-800-243-4630.