3M SE-400 user manual Auto-Run and setting timed run,  Setting the Timed Run

13

Setup/instrument configuration

Auto-Run and setting timed run

Auto-Run and setting timed run

With a Timed Run mode, you program the instrument’s duration (or timed run) and then manually start your study. The Auto-Run will end when the duration expires.

 Setting the Timed Run
1. From the setup screen, select Auto-Run by pressing the	/	keys and press	key.

2. Auto-Run will appear. To select disabled or timed run field, press the key.

To activate, change the disabled field to

Timed Run following steps above.

Figure 3-7: Auto-Run screen
3. To select timed run, press	/	keys until it appears and press	key. The duration field will
appear. (See Figure 3-8 below.)

•Note: to turn off this feature repeat this step until disabled appears.

4.	To enter in a time, press		key to move the time field. Using the		/	keys, change the time
	and press	key while repeating this to move to the hours, minutes and seconds field.
5.	Press	key to save and press		key twice to return to the measurement screen.

•Note: Remember to manually press Run key to begin the Timed Run.

Timed run is set for 8 hours and 30 minutes

Figure 3-8: Auto-Run screen

Sound Examiner SE-400 Series