Kompernass KH 2222 manual Functions during operation, Set the main volume

•have positioned the components of the surround sound system in a suitable place and

•have connected them to the subwoofer with the sup- plied cables

•have connected the required audio/video devices with the named connecting options to the surround sound system and

•have connected the subwoofer to the power supply

you can now use the surround sound system.

To do this:

1Switch on the audio/video device, which you have connected to the surround sound system. If necessary: Start the playback of the equipment which is to play back the sound with the surround sound system.

2With the remote control of the surround sound system choose the source of the sound you would like to play back with the surround sound system:

To play back 5.1 channel surround sound from a DVD player connected to the surround sound system:

1 If the DVD player is connected to the television with a scart cable: First of all set the volume of the television to the minimum value.

2Press the DVD/5.1 button on the remote control. DVD/ 5.1 will appear in the display of the center speaker. The sound is now played back by the front speakers and the subwoofer.

3Press the 5.1EXT and Q.SOUND buttons on the remote control one after the other. DVD/5.1, Q SOUND and 5.1EXT will appear in the display of the center speaker. The sound will now be played back by all the speakers and the subwoofer of the surround sound system.

4If you press the STE./3STE. button on the remote con- trol, Q SOUND will no longer appear in the display. The sound is now played back by the front speaker and the subwoofer.

Press the STE./3STE. button once more, then DVD/5.1, 3 STEREO and 5.1EXT will appear in the display. The sound will be played back by the front and the center speakers and also the subwoofer.

To play back stereo sound from an audio/video device with the Q SOUND function of the surround sound system as simulated surround sound:

1 If the audio/video device, whose sound you would like play back with the surround sound system,

•is connected to the AUX cinch pair of jacks: Press the AUX button on the remote control

•is connected to the TV cinch pair of jacks: Press the TV button on the remote control

•is connected to the CD cinch pair of jacks: Press the CD button on the remote control

2Then press the Q SOUND button. The Q SOUND func- tion has now been switched on. Six-channel surround sound is simulated with the Q SOUND, if there is only two-channel sound. The stereo sound is then played back by the front, rear and the center speakers.

3To switch back to only stereo sound playback, press the STE./3STE button once.

Press the STE./3STE. button again to switch on the so- called “3-Stereo” function. This makes the front and the center speakers and also the subwoofer play back the stereo sound.

8.Functions during operation

If the sound of a connected audio/video device is played back with the surround sound system, then the following functions are available:

8.1. Set the main volume

By setting the main volume of the surround sound sys- tem, you also change the volume of all speakers. Press the MAST.VOL + button to increase the main volume. Press the MAST.VOL – button to lower the main volume. Each time you press the buttons, you set the main volume between the values 00 (sound off) and 80 (maximum volume).

8.2.Set the volume of individual speakers

You can set the volume of

•the rear speakers

•the center speakers and

•the subwoofers

individually. The currently set volume is shown briefly on the display of the center speaker.

•To change the volume of the rear speakers: Press the SURR + button to increase the volume. Press the SURR – button to lower the volume. Each time you press the buttons, you set the volume between the values -10 (minimum volume) and 10 (maximum volume).

•To change the volume of the center speaker: Press the CENTER + button to increase the volume. Press the CENTER – button to lower the volume. Each time you

KH 2222 11