Kompernass KH 2316 Intended use, Items supplied, Technical Data, Safety information, Risk of fire

Models: KH 2316

1 42
Download 42 pages 36.28 Kb
Page 4
Image 4
Intended use

Intended use

This micro system is intended exclusively for the playback of audio CDs, MP3-CDs, CD-R, CD-RW, audio cassettes and for the playback of radio programmes. Additionally, the micro system is suitable for the recording of audio cassettes. The micro system is not intended for use in commercial or industrial environments.

No warranty claims will be granted for damage resulting from improper use!

Items supplied

1Micro system

2Speakers

1Remote control (incl. 2 x 1.5 V batteries)

1AM (MW) antenna

1FM (USW) dipole antenna

1Operating instruction manual

Technical Data

Micro system

230 V~, 50 Hz

Rated voltage:

Power consumption:

 

In standby

4 Watt

During operation

33 Watt

Backup batteries:

3 x 1,5 V Type AA

 

(not supplied)

Radio frequency range:

MW (AM): 530 – 1600 kHz

Measurements

USW (FM): 87,5 – 108 MHz

 

(W x H x D):

16 x 25,8 x 21 cm

Weight :

2,7 kg

Speaker power rating.:

max. 8 Watt RMS

Operating temperature:

5° - 40°C

Storage temperature :

—20° - 60°C

Protection class:

II

The device's technical details allow for an adjustable frequency range of MW (AM) 522-1620 kHz. In other countries different national regulations regarding the assigned radio frequency ranges can exist. Please note that information received outside of the assigned radio frequency ranges may not be used, passed on to third parties or otherwise misused.

Cassette player/recorder

Cassettes:

Standard cassettes

 

(C-90 or shorter)

Tape speed:

4.75 cm/sec.

Remote control

 

Batteries:

2 x 1,5 V Type AAA

Safety information

Do not permit children to handle electrical appliances without supervision, as they cannot correctly assess the possible dan- gers of injury.

Unplug the power cord after every use and before cleaning, so as to prevent the device from switching on inadvertently.

Check the device and all parts for visible damages. The safety concept can work only if the device is in a faultless condition.

The power plug must always be easily accessible, so that in the event of an emergency the device can be quickly disconnected from the mains power supply.

Risk of explosion!

Do not throw batteries into a fire. Do not recharge the batteries.

Risk of electrical shocks.

Connect the device to an electrical wall socket with a mains voltage of 230 V / 50 Hz.

Do not operate the device if the connection cord or the power plug is damaged.

The connection cord or device should be immediately re- paired or exchanged by the customer service department

if they fail to function faultlessly.

• NEVER submerse the device in water. Wipe it only with a slightly damp cloth.

Do not expose the device to rain and never use it in a damp or wet environment.

Make sure that the power cord does not become wet during operation.

You must not open the device housing or repair the device. Should you do so, the safety of the device may be compro- mised and the warranty becomes void.

Do not place objects containing fluids, e.g. flower vases, on or near the device.

Information concerning power disconnection

To completely disconnect the device from the power source the power plug must be removed from the power socket. For this reason the device should be placed in a position where a constant unobstructed access to the power socket is assured, thus in an emergency situation you are able to immediately pull out the power plug. To eliminate the risk of fire you should completely disconnect the power plug from the power socket when the device is not going to be used for a long time, for example, during holidays.

Always grasp the power cord by the plug. Do not pull on the cord itself and never touch the power cord with wet hands as this could result in a short circuit or an electrical shock. Do not place the device, furniture or anything else on the power cord and make sure that it does not become clamped. Never tie knots in the power cord and do not join it to other cables. Place the power cord in a position where it can not be trod on. A damaged power cord can cause a fire or electrical shock. Check the power cord from time to time. Should it become damaged contact your nearest authorized customer service centre or dealer to have it re- placed.

Risk of fire!

Do not use the device in the vicinity of hot surfaces.

Do not place the device in locations that are subject to direct sunlight. Otherwise, it may overheat and become irreparably damaged.

Never leave the device unattended while it is being used.

Never cover the ventilation slots of the device while it is on.

Avoid placing this device in locations that provide insufficient ventilation or hot locations and do not place the device in direct sunlight or under strong artificial light sources.

- 2 -

Page 4
Image 4
Kompernass KH 2316 manual Intended use, Items supplied, Technical Data, Safety information, Risk of explosion, Risk of fire