Introduction / Safety notes

Q Technical details

Nominal voltage:

230 V ~ 50 Hz

Nominal power (heating-up):

approx. 500 W

Nominal power (working):

approx. 35 W

Heating up time:

approx. 4 min.

Protection class:

II / &

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QSafety notes

JAttention! Please read all the instructions and advice. Failure to observe the instructions and advice given below may result in electric shock, fire and / or serious injury.

1. Your working area

a)Keep your working area clean and clutter-free. Untidy or poorly lit working areas can lead to accidents.

b)Do not allow the device to become wet. Do not operate it in a moist environment.

c)Keep children and other peo- ple away while you are op- erating the electrical tool.

Distractions can cause you to lose control of the device.

2. Electrical safety

a)The mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock.

b)Avoid touching earthed surfaces such as pipes, radiators, ovens and refrig-

erators with any part of your body. There is an increased risk of electric shock if your body is earthed.

c)Keep the device away from

rain or moisture. Water entering an electrical device in creases the

risk of electric shock.

d)Do not use the mains lead for

any purpose for which it was not intended, e.g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the lead away from heat, oil and sharp edges.

Do not touch the mains lead if it becomes damaged or severed while you are working, instead pull the mains plug out of the mains socket immediately. Damaged or tangled mains leads increase the risk of electric shock.

e)When working outdoors with an electrical power tool always use extension cables that are also approved for use outdoors.

The use of an extension cable suitable for out- door use reduces the risk of electric shock.

3. Personal safety

a)Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication.

One moment of carelessness when using the device can lead to serious injury.

b)To avoid the danger of inju- ry, burning and damage to health:

Danger of burns! The glue and

the nozzle can reach temperatures of 200 °C. Do not touch the nozzle

or the glue. Keep other people and animals away from the hot glue. On contact with the skin, hold the affected part under running cold water for several minutes. Do not try to remove the glue from the skin.

GB/MT 19

Page 17
Image 17
Kompernass KH 3119 Introduction / Safety notes, Technical details, Your working area, Electrical safety, Personal safety