Operation / Maintenance and Cleaning / Disposal / Information
Switching off the device:
JPull the mains lead out of the mains socket.
Changing the nozzle:
jWear protective gloves.
jHeat up the device for about 4 minutes. Change the nozzle 8 when it is hot.
JDanger of burns! Touch the noz-
zle 8 only by the heat shield 9 . The nozzle tip is hot!
QInformation
QService
Please refer to the warranty documents for information regarding your national service point.
JHave your device repaired only by qualified specialist personnel using original manufactur- er parts only.
QMaintenance and Cleaning
The glue gun is
JWarning! Pull the mains lead out of the
mains socket before you clean the tool.
jAlways keep the device clean and dry.
jDo not allow any liquids to enter the tool. Use a soft cloth to clean the housing. Never use petrol, solvents or cleaning agents that might attack plastic.
QDisposal
The packaging is made entirely of recy- clable materials, which you may dispose of at local recycling facilities.
Do not dispose of electrical appliances in household waste.
In accordance with European Directive 2002 / 96 / EC on used electrical and electronic appliances and its implementation in national law, used power tools must be collected separately and recycled in an ecologically compatible manner.
Information on options for disposing of electrical appliances after their useful life can be obtained from your local or city council.
QDeclaration of Conformity / Manufacturer 
We, Kompernaß GmbH, Burgstr. 21,
EU Low Voltage Directive (2006 / 95 / EG):
Electromagnetic compatibility (89 / 336 / EEC):
EN55014,
Description of the device: PARKSIDE Hot melt glue gun PHKP 500
Bochum, 31.10.2007
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifications in the course of further development.
GB/MT
21
