5. Assembly
All accessories are coated with a thin oil film to protect them from corrosion. Therefore clean all the parts carefully before using the appliance for the first time, in accordance with the detailed instructions found under “8 Cleaning”.
a) Assembling the meat grinder
Unfold the fold out. There you will find the
• Place the transport screw with the hexagonal axle in the mincer casing .
Ensure that the metal washer remains on the hexagonal axle. Without the washer, the screw would close too fast.
• Now place the cross blade so that the sharp side is facing the cutting disc . Warning - the blade is very sharp!
Attention: the device can get dam- aged if the cross blade is wrongly inserted in the opposite direction!
•Choose the appropriate cutting disc – You can find the discs in the small recess at the top of the device (Fig. D).
For this push the cover upwards and take out the required disc.
•Insert both the edges of the chosen
disc into the slots in the mincer casing .
•After everything has been assem- bled correctly, screw on the ring clamp tightly.
5. Assembly
•The assembled meat grinder is con- nected by a bayonet joint to the
motor block :
GB
-Insert the meat grinder into the motor block. The arrow on the mincer casing should be on the symbol “offen” (open) (Fig. A).
-Press in the meat grinder lightly. Turn the stuffing funnel of the meat grinder upwards till it is ver- tical (Fig. B).
-To take it out, once again press down the meat grinder lightly and turn the stuffing funnel in the direction of the symbol ”offen“ (Fig. A). Now you can pull out the meat grinder.
• Finally place the feed tray | on |
top on the stuffing funnel. |
|
b)Fixing the sausage stuffer attachment
Once the meat grinder has been assembled as described under a):
• | Turn open the ring clamp | and ... |
• | Replace the cutting disc | with |
the sausage disc . This can be found in the small recess (Fig. D) on the top of the device. Fix this in as described in a).
• Now place the sausage stuffer attachment in front of the sausage disc, ...
•before screwing on the ring clamp tightly.
5
