IB_KH4055_0706_UK.qxd 18.09.2006 14:11 Uhr Seite 3

Lift the vehicle until the wheel to be changed is no longer in contact with the floor.

Remove the wheel nuts / bolts in an alternating cross pattern and remove the wheel.

Put the replacement wheel in position and tightly screw in the wheel nuts / bolts.

Lower the vehicle and retighten the wheel nuts in an alternating cross pattern with the wheel nut wrench.

Important:

After changing the wheel, check the air pressure in all tyres.

The wheel nuts / bolts must be inspected again and retightened after approximately 50 km.

Do not perform any work under the vehicle while it is lifted up with the jack.

3

Page 3
Image 3
Kompernass KH 4055 manual IBKH40550706UK.qxd 18.09.2006 1411 Uhr Seite