Siemens NI-1200 specifications Microphone, Volume UpNolume Down Keys, Optional Headset

Issue 5, June 1999

Flash Rate	Line Status
Off	Available for call
On steady	Une in use, or Privacy invoked
	on EKTS Associaled call
Wink	EKTS Associated line in use
Flash (faster than Wink)	Ringing
Blink (fastest)	On hold

Faceplate Labels

Associated with the featurelline keys are paper faceplate labels, protected by removable plastic covers. The person who set up your Optiset terminal should already have tilled in these labels with the appropriate telephone numbers and tealure names.

However, should you need to change a label, insert a pin or paper clip into the small hole at the bottom ot the plastic cover and lift the cover off the terminal. After correcting the paper label. replace the plastic cover by inserting the two small tabs at each end ot the cover into the corresponding slots in the tace ot the terminal.

Speaker

Your Optiset terminal is equipped with a speaker, located in the cradle under the handset. This speaker, together with the built-in microphone, permits hands-free call handling and sharing of calls with other persons in the immediate vicinity of the terminal. Calls may be placed or answered, without lifting the handset, by simply pressing either the Speaker key or the appropriate line key. To end a speaker call, press the Speaker key at the end of the conversation.

If you are engaged in a handset call and you wish to share the call with other persons in the vicinity while the far-end party hears only you, press the Speaker key and continue using the handset. If you want the far-end party to hear other persons in the vicinity of the

6 1275·00030

Issue 5, June 1999

lerminal, hang up the handset while the speaker is activated. To end the call, press the Speaker key again.

Microphone

A microphone is built into the bottom of your Optiset terminal. Working in conjunction with the built-in speaker, the microphone allows you to place and receive calls without using the handset.

Be sure that the terminal is placed on a hard surface so that nothing blocks the microphone. If your terminal is used in an unusually noisy environment, you may have to use the Mute key to prevent the microphone from picking up local noise and making it hard to hear the far-end party.

Volume UpNolume Down Keys

The two keys marked "+" and "_" are used to adjust the volume of the ringer and of the sound received through the speaker and the handset. To adjust the ringer volume, while an incoming call is ringing, press the 1t+1t key to increase the volume or the It_" key to decrease the volume. The display indicates the current relative volume level. as well as a menu option for saving the indicated level. To save the indicated volume level, press the tI dialog key.

To adjust the volume of the handset or speaker, during a call or while listening to dial tone, press the "+" key to increase the volume or the "_" key to decrease the volume. The display indicates the current relative volume level, as well as a menu option for saving the indicated level. To save the indicated volume level, press the tI dialog key.

Optional Headset

If your Optiset terminal is equipped with a TA-TAPI terminal adapter, an optional electret headset can be used with the terminal. If the terminal adapter and headset are equipped, one of the feature keys on the Opliset terminal should also have been programmed to function as a Headset key. This key allows you to control the call­ handling functions associated with the headset without having to continually plug into and unplug from the terminal adapter. (Other headset systems are also available that do not require the TA-TAPI

1275·00030 7