Illue 5, June 1999
If, during initial setup of the Optiset terminal, a line was configured for Autoanswer, then incoming calls on that line are connected automatically. Depending on how the line was configured, either no alerting or a single ring will occur for an incoming call.
•Autoanswer Key
If no Optiset terminal lines were set up for Autoanswer. the Autoanswer key can be used to initiate this feature. While this feature is active. all incoming calls are answered automatically without any action required by the user. Depending on how the Line key ringing option was configured, and incoming call may be accompanied either by no alerting or by a single ring.
Reject a Call (No Other Calls Active)
•Reject (Menu and Dialog Keys)
If the
•Disconnect (Key)
To reject an incoming alerting call, press the Disconnect key. Alerting ceases immediately.
Reject a Call (With Another Call Active)
•Reject (Menu and Dialog Keys)
If, during an active call, alerting begins for another incoming call, the menu system briefly displays the Incoming Call Ringing menu. To reject the incoming alerting call, select the
Reject Call option from the menu. Alerting ceases immediately.
•Disconnect (Key)
If, during an active call, alerting begins for another incoming call, the menu system briefly displays the Incoming Call Ringing menu. While this menu is being displayed, you can
30 | 1275·00030 |
Issue 5, June 1999
reject the alerting call by pressing the Disconnect key. Alerting ceases immediately.
Note that if you press the Disconnect key after the Incoming Call Ringing menu is no longer displayed, the existing active call is disconnected!
•Preview (Key)/line Key/Reject (Menu and Dialog Keys) or Disconnect (Key)
To reject an alerting incoming call that occurs while you have another call active, you can press the Preview key to place the terminal in the preview mode; then press the line key associated with the alerting incoming call; finally, use the menu system to select the Reject Call option, or press the Disconnect key. Alerting ceases immediately.
Reject All Calls (Do Not Disturb)
•Do Not Disturb (Key)
While no incoming calls are alerting, press the Do Not Disturb key. The indicator next to the Do Not Disturb key lights. All future incoming calls are automatically rejected, and no alerting occurs, until the Do Not Disturb feature is turned off.
Clear an Active/Connected Call
•
Place the handset back in the cradle to clear an active, connected call.
•
If the microphone and speaker are being used, press the Speaker key to clear an active, connected call.
•Disconnect (Key or Menu and Dialog Keys)
Select the Disconnect Call option from the menu system or press the Disconnect key to clear an active, connected call. If the handset is in use, it becomes idle until either the cradle switch is pressed and released, a call on hold is retrieved, or a
1275·00030 | 31 |
