- 5-
Technical data
Mains voltage: 220-240 V ~50Hz
Protection class: II /
Number of bulbs: 7 bulbs
Bulb type: 34 V / 3 W with E10 thread
Nominal power: 21 W total
Dimensions: 39,5 x 34 cm (W x H)
Power cable length:1.5 m
Items supplied
Device
Spare bulb
Operating instructions
Appliance description
qBulb
wBulb holder
ePower switch
rSpare bulb
tDecoration
Utilisation
• Check to ensure that the appliance is undamaged
and all parts and remnants of the packaging are
removed from it.
• Check to ensure that every bulb holder wcon-
tains a bulb q. It could be that for transportation
reasons the upper bulb qhas been screwed
out. Screw this bulb back into the bulb holder w
first of all.
• Place the appliance on a level surface from
which it cannot fall down.
• Completely unwind the power cable and place
it such that no one can trip over it and pull the
appliance down.
• Insert the power plug into a wall socket.
• Switch the appliance on or off using the power
switch e.
Changing bulbs
• First remove the plug from the wall socket. Switching
off the appliance is not sufficient because it conti-
nues to be under power for as long as the power
plug is connected to the wall socket.
• After immediate use, first allow the bulb to cool
down.
• Always screw bulbs in and out of the bulb holder
with your fingers, never use pliers or similar tools.
If you do, the bulb glass could splinter.
• Use the supplied spare bulb ror others that
meet the specifications given in the technical
data. Using more powerful bulbs, or those with
different wattages, could lead to the other bulbs
becoming too hot or to an overload of the power
cable.
• Screw the replacement bulb into the bulb holder
wuntil it is firmly seated. To avoid damage to
the bulb itself, do not use excessive force.
Caution: Should the glass body of a lamp
detach itself or the glass has broken:
• Immediately remove the plug from the wall socket!
There is a risk to life if the protruding filaments
are touched.
• Carefully attempt to unscrew the remains of the
bulb from the bulb holder with long-nosed pliers,
under no circumstances should you use your un-
protected fingers. There is a risk of injury through
broken glass.
• Make contact with Customer Services if you do
not feel confident about it or were not successful
in your attempt.
IB_KH4148_KOE5848_EN.qxd 07.09.2007 12:12 Uhr Seite 5