- 4 -
Operation
Warning!
The motor switches itself off as soon as the mixing
jug is removed from the motor block. It could then
be overlooked that the appliance is still switched
on. The motor will thus start of its own accord as
soon as the mixing jug is replaced on it:
Therefore:
• First insert the power plug into the wall socket
when the mixer jug is filled and mounted with its
lid fitted and closed.
• Before mounting the mixing jug always check to
see that the appliance is switched off or that the
power plug has been removed.
• Before removing the mixer jug, switch the app-
liance off, remove the power plug and wait for
the motor to stop revolving.
Filling and mounting the mixer jug
³Only fill the mixer jug when it is removed from
the motor unit.
³Afterwards, firmly press the lid onto the mixer
jug. Ensure that the pourer on the mixer jug is
also securely closed.
³Insert the filling cap into the lid opening and
secure it by turning it clockwise.
³Place the ready filled and sealed mixer jug onto
the motor block. Lightly turn the mixer jug until
you can press it down. The motor can start only
when the mixer jug is securely positioned.
Selecting operating speeds
When the mixer jug is filled, completely sealed and
securely fitted to the motor block, you can then
switch the appliance on.
³Place the switch on ...
–Level 1-3
for fluid or soft foodstuffs, for mixing, blending and
stirring
–Level 3-5
for firmer foodstuffs or for hacking
–Level Ice Crush/Clean
for a short, powerful impulse operation, e.g. for
crushing ice cubes or for cleaning. To avoid over-
burdening the motor the switch does not lock into
this position. Therefore, hold the switch in this
position for a short period.
Filling when in use
Warning!
Should you wish to insert further foodstuffs during
operation, you may ONLY open the filling cap
provided for this purpose.
• Under no circumstance should you open the lid.
Pieces of the foodstuff could be thrown out at
high speeds!
• Do not insert cutlery items or mixing tools into
the mixing jug when the appliance is in use.
There is a considerable risk of injury should these
make contact with the swiftly rotating cutters!
To insert something when the appliance is in
operation, ...
³turn the filling cap anti-clockwise and remove
it.
³Afterwards, replace the filling cap into the lid
and secure it by turning it clockwise.
IB_KH527_E2248_LB3 14.12.2007 12:24 Uhr Seite 4