•When you have finished, switch off the blender and first remove the lid 2 by turning it clockwise.
•Exercise special care when cleaning the blades z, the blender jug 4 with installed blade and the cutting discs
•Wipe the housing with a clean, damp cloth after each use.
•Then remove the blender jug 4 by turning it clockwise.
Hints:
•You can add your ingredients to the blender jug 4 through the opening in the lid 2 during ope- ration. To do so, simply remove the splash protec- tion cap 1.
•If you process hot liquids, remove the splash protection cap 1 to allow the steam to escape.
•Should ingredients be trapped in the blender jug
4 during operation, proceed as follows:
-Switch off the device (speed controller 7 to le- vel 0) and pull the plug from the socket.
-Remove the splash protection cap 1 and the lid 2.
-Remove the trapped ingredients in the blender jug 4 using the spatula o. Ensure you do not damage the spatula o with the blade z!
9. Cleaning & Care
Caution:
Never immerse the device in water or other liquids. There could be potential hazard of
Warning regarding appliance damage:
NONE of the appliance components are designed for cleaning in a dishwashing machine! Additional- ly, do not use abrasive cleansers for cleaning appli- ance components.
•You can clean the mixing bowl 9 and the lid 0 in hot soapy water.
•Always remove the plug from the socket before cleaning the appliance. Otherwise, you are at risk of receiving an electric shock!
•Clean all appliance components that have come in contact with foodstuff with detergent and hot water after use.
•Use an appropriate dishwashing brush for places that are difficult to access.
10. Malfunctioning
If the food processor suddenly stops functioning:
It means that the appliance has overheated and the integrated safety cut off has switched off the food processor.
•Pull the plug from the socket
•Set the speed controller 7 to level 0
•Allow the device to cool down for 15 minutes
•If the appliance has not cooled off completely after 15 minutes, it will not start. Wait another 15 minutes before switching it on again.
If the food processor does not switch on:
•Check whether the power plug is inserted in the socket.
- 8 -
