6.3Insert the ingredient by filling shaft and pusher
Caution:
Never use your fingers, spatula, spoon handles or similar objects for pushing foodstuff through the filling shaft q! Risk of injury!
•You can add liquid and solid foodstuffs to the mixing bowl 9 through the filling shaft q. You can close the filling shaft q with the pusher w while the appliance is in use, in or- der to avoid splashing or flour (e.g. while kneading flour) from coming out.
•Use the pusher w to force food stuffs through the filling shaft q.
•The pusher w is equipped with a measuring cup e. If you remove it you can reduce size of the filling shaft q. This can be useful when cutting or grating foodstuffs.
7.Working with the mixing bowl
The supplied accessories for the mixing bowl 9 consist of 6 grating and cutting discs
7.1 Working with the cutting blade
Caution! Risk of injury!
•The cutting edges are very sharp! Exercise speci- al care when inserting and removing or cleaning the cutting blade z!
•The bowl 9 must first be properly locked in posi- tion before inserting the cutting blade z. Risk of injury!
•Never use your fingers, spatula, spoon handles or similar objects for pushing foodstuff through the filling shaft q!
The cutting blade z can be used to mix, chop or knead dough. Use the cutting blade z, for instan- ce, for chopping meat, cheese, onions, herbs and nuts.
•Remove the cutting blade z from the protective case u.
•Fit the mixing bowl 9 to the food processor.
•Fit the cutting blade z on the retainer r and place the lat- ter on the drive shaft 8.
•Place the lid 0 on the mixing
bowl 9.
•Insert the ingredients into the mixing bowl 9 through the loading shaft q.
•Place the stodger w in the lo- ading shaft q.
•Now switch on the appliance by setting the speed controller 7 to the level recommended in the table.
If you are uncertain about the speed, use the fastest level (3).
- 4 -
