The cutting (II/III) and grating discs (IV/V) can be used to slice or grate food stuffs quickly. The special
•Place the mixing bowl 9 on the food processor. Select the appropriate disc.
•Place the disc with the lea- ding edge (the side without the ring marking on the cor- ners) in the disc holder i.
•Push the other side (marked with two circles at the cor- ners) down until the disc engages with a “click”.
•Fit the retainer r to the drive shaft 8. Insert thumb and in- dex finger in the holes of the disc holder i and place it on the retainer r.
•Place the lid 0 on the bowl
9.
•Set the speed controller 7 to level 3 (maximum speed) for cutting and grating. Should you wish to process soft fruit or vegetables you can also select a lower speed.
•Slowly and gradually push the ingredients in the filling shaft q using the pusher w.
•To remove the disc from the disc holder i, remove the disc from the disc holder i by pushing on the marked side in an upward direction.
Hints:
•Cut the food into pieces so that they fit through the filling shaft q.
•Fill the filling shaft q evenly and do not exert ex- cessive pressure.
•If you wish to process large quantities of food do it in small batches and empty the mixing bowl 9 inbetween.
7.5 Working with the kneading blade
With the kneading blade t you can knead bread dough and mix batter or cake mixture.
•Place the mixing bowl 9 on the food processor.
•Place the kneading blade t on the retainer r and fit on the drive shaft 8.
•You can now fill ingredients through the filling shaft q.
•Add the ingredients to the mixing bowl 9.
- 6 -
