![](/images/new-backgrounds/1240917/24091721x1.webp)
SAFETY CLUTCH
For your safety, the PEBH 780 rotary percussion drill is fitted with a safety clutch. This has the effect that when the drilling tool becomes trap ped the drive is automatically interrupted. This means you can work more safely. However, you should always seek to keep a proper footing and balance, hold the drill with two hands and always use the auxiliary side handle .
DEPTH STOP
Use the depth stop | to set the drilling depth to produce a hole of the exact depth required. | |
Simply loosen the wingnut and set the depth stop | using the scale, before tightening the wingnut again. |
MAINTENANCE OF YOUR ROTARY PERCUSSION DRILL
Before doing any work on the drill, always pull out the plug.
1.Clean the drill regularly. For the best results do this straight after the work has been completed.
2.Do not allow liquids to get inside the drill. Use a soft cloth for cleaning the housing. Do not use petrol, solvents or cleaners that might attack the plastic.
3. Air vents | must always be clear and clean. |
Further practical tips for power tools can be found in the accompanying booklet on safety advice.
We reserve the right to make technical modifications in the course of further development.
STATEMENT OF CONFORMITY
We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21,
EC machine guideline: | (89/392 EEG), (91/368 EEG), (93/44 EEG), (93/68 EEG) |
EC low voltage regulations: | (73/23/EEG), (93/68 EEG) |
Electromagnetic compatibility: | (89/336 EEG), (92/31 EEG), (93/68 EEG) |
Applicable harmonised standards: | EN |
| EN |
Manufacturer: | PARKSIDE |
Model type: | PEBH 780 |
Description: | ROTARY PERCUSSION DRILL |
Bochum, 01.04.2002 |
|
Hans Kompernaß
- Managing Director -
11