General safety advice / Preparing for use

Warning! Protecting yourself from laser radiation:

Laser radiation

Never look directly into the beam!

Laser class 2

Maximum output power ≤ 1 mW

Wavelength: 650 nm

JDo not look directly into the laser beam or into the opening from which it is emitted.

JNever direct the laser beam on to reflective surfaces or at people or animals. Even a brief look into a laser beam can damage your eyes.

JNever open the laser unit housing.

JIf the device is likely to remain unused for an extended period, remove the batteries from the laser unit battery compartment.

Working safely:

JIf a dangerous situation arises, pull the mains plug immediately out of the mains socket.

JNever use the device for a purpose for which it was not intended.

JAlways keep the device clean, dry and free of oil or grease.

JIf the saw is used whilst fixed in place on a saw table then the saw table must have a restart cut-out.

JMake sure the device is switched on before placing it against the workpiece.

JAlways work away from your body.

JDo not saw materials containing asbestos.

JThe course of the cut must have no obstructions above or below it.

12 GB/IE/CY

JThe saw blade must not project more than 3 mm out of the workpiece.

JWhen you are sawing, always make sure that you do not cut through any nails, screws or the like.

JDo not work with the device in the overhead position.

JProtect the saw blade from sharp blows or impacts and prevent it from becoming tilted.

JWhen you switch off the saw, allow the blade to slow down naturally - do not assist this process in any way.

JCracked or distorted blades are not to be used. HSS (High Speed Steel) saw blades are not to be used.

JBefore carrying out any work on the saw, e.g. setting the base plate etc. always pull the mains plug out of the mains socket.

JNever remove sawdust or splinters whilst the saw is running.

JHave a suitable, tested vacuum removal device attached to the saw when working with woods or materials that create dusts that may be hazardous to health.

JAlways use the safety devices integrated into the circular saw, e.g. the safety lock-out and automatic blade guard.

JEnsure that all moving parts of the saw blade protection system function properly and all the assemblies and components involved in covering the saw blade are in perfect working order.

JDo not lock on the ON / OFF switch in hand- guided operation.

QPreparing for use

The PHKS 1450 LASER circular saw has Intelligent Power Control.

This automatic power delivery system ensures that for a particular speed range the power output remains constant when working on harder and more resistant materials.

Page 9 Page 11
Page 10
Image 10
Kompernass PHKS 1450 LASER manual General safety advice / Preparing for use
Page 9 Page 11

PHKS 1450 LASER specifications

The Kompernass PHKS 1450 LASER is a powerful and versatile power tool that is designed to cater to the needs of both DIY enthusiasts and professionals. Its standout feature is the integrated laser guide, which enhances precision and accuracy in multiple cutting applications, making it an invaluable addition to any workshop.

With a robust motor rated at 1450 watts, the PHKS 1450 LASER delivers impressive cutting performance across various materials, including wood, plastic, and metal. This high power output ensures that users can tackle even the most challenging projects with ease. The tool is well-balanced and ergonomically designed, which minimizes user fatigue during extended use and allows for greater control over the cutting process.

One of the key characteristics of the PHKS 1450 LASER is its adjustable cutting depth and angle, which provides versatility. It can perform bevel cuts up to 45 degrees and can cut through materials at varying thicknesses. This adaptability makes it suitable for a wide range of applications, from framing and flooring to crafting and home improvement projects.

The laser guide integrated into the design enhances cutting precision. This feature projects a visible line on the workpiece, allowing users to align their cuts accurately. Coupled with the high-quality carbide-tipped blades that can be easily swapped out, the cutting performance is exceptional and ensures clean, splinter-free edges.

Safety is also a priority with the PHKS 1450 LASER, featuring protective guards and a stable base that provide improved safety while in use. The tool is equipped with an anti-vibration system, which dampens vibrations and results in greater stability, allowing for more accurate cuts.

Furthermore, the compact and lightweight design of the Kompernass PHKS 1450 LASER makes it easy to transport, while its sturdy construction ensures longevity and durability. Whether working at home or on-site, users can rely on this tool for consistent performance.

In summary, the Kompernass PHKS 1450 LASER combines power, precision, and safety in an easy-to-use design, making it a top choice for anyone looking to enhance their cutting capabilities. Its laser guide, adjustable features, and ergonomic build make it a standout among power tools, ensuring optimal results in various cutting tasks.
Top Page Image Contents