Kompernass T4X manual Introduction, For your safety, Delivery Contents, Proper Use

Introduction

The following pictogrammes / symbols are used in these operating instructions:

Read the operating instructions!	W	Watts (effective power)
Always heed warning labels and	V~	Volt (AC)
safety instructions!
Caution - Danger of electric shock! Hazardous		Proper procedure and handling.
voltage – danger to life!
Explosive material!		Keep children and other unauthorised personnel
		at a safe distance when using electrical tools.
Risk of fire!		Dispose packaging and appliance in an
		environmentally-friendly way!

Battery charger T4X

for rechargeable batteries / batteries from 1.2 Ah to 120 Ah

QIntroduction

QFor your safety

Please carefully read these operating in- structions and fold out the page with the

illustrations.Observe this information exactly when putting the appliance into operation. If you have any further

questions regarding use, please contact the service department responsible for your country. Keep these operating instructions in a safe place and hand them over to anyone to whom you pass on the appliance.

Operate the charging appliance in a warmed and well ventilated room. Any incorrect or improper use leads to loss of the warranty. The manufacturer takes no responsibility for damage(s) arising out of usage that is contrary to the instructions laid down. The appliance is not meant for commercial use.

QDelivery Contents

Check the appliance and all accessories for dam- age immediately after unpacking. Do not put a de- fective appliance or parts into operation. Please contact the resonsible service department for

a replacement.

1Charger TRONIC T4X

2Quick / contact clamps (1 red, 1 black)

1Operating manual Guarantee documents

QProper Use

The TRONIC T4X is a primarily mains-connected (working with measuring and control functions) charging station with pulse trickle charge function, suitable for charging and trickle charging 12 V lead accumulators (batteries) with electrolyte solution or gel. The charger has a circuit-breaker as protection against sparking and overheating.

6 GB/IE/CY

QComponent description

1STANDBY LED display :“STANDBY“ (standby)

2	LED display „Mode 1“
	LED display „Mode 2“
3
4	LED display „Mode 3“
5	LED display „incorrect polarity/fault“
6	LED display „fully charged“
7	LED display „Charging process active“